Inverter Air Plasma Cutter

Home » Products » Inverter Air Plasma Cutter
  • PLASMA CUT-40 Inverter Air Plasma CutterFor operation of PLASMA CUT-40 inverter air plasma cutter, there is a rotary button for adjustment of current and the range is from 15 to 40A. The most outstanding feature of this product is the range for the workpiece is 7mm to 12mm. As a reminder, the duty cycle is 35%, so it will be overheat and burn over a long period of work under full load. Thus OC (open circuit) abnormal warning lights are provided, so please stop and check when light ...
  • CUT-40 Inverter Air Plasma CutterCUT-40 inverter air plasma cutter is a piece of thin workpiece cutting machinery and the thickness range for metal is from 8 mm to 12mm. Compared with PLASMA CUT-40, it has the same range of current, from 10 to 40A. Besides that, there is a cutting current cluster for this product and pointer indicates the current. Last but not least, 60% duty cycle, which means that this machine can work under full load operations ...
  • CUT-60 Inverter Air Plasma CutterCUT-60 inverter air plasma cutter, compared with carbon steel cutting machine, has the advantages of light weight and low cost. Open circuit voltage is 260 V and rated load voltage is 104V when power output is not connected to load. For design of the control panel, tilt is adopted so it is easy to view the parameters and operation. The range of current is from 20 to 60A and seesaw type of switch is used to control gas detection ...
  • CUT-80 Inverter Air Plasma CutterCUT-80 inverter air plasma cutter can be used for arbitrary curve cutting of sheet metal and two casters give it strong portability. The design and the layout of control buttons of this product are the same with model CUT-60. Besides that, they have the same key cutting parameters and they can be used in the thickness range from 1 to 25mm. However, they still have some differences. To be more specific, model cut-80 is bigger and heavier ...
  • CUT-100 Inverter Air Plasma Cutter CUT-100 inverter air plasma cutter can be used as stainless steel cutting machine in steel structure manufacturing, vehicle maintenance and other occasions. Under rated input power and current, the maximum cutting thickness for this product is 30mm. In addition to that, please replace the consumable parts on time because cutting torch could be serious damaged by uncontrollable air plasma arc created by severe ...
  • CUT-120 Inverter Air Plasma CutterCUT-120 inverter air plasma cutter is used as titanium plate cutter. The back of the machine, with no gauge or button, can be connected to a small air compressor and the recommended pressure is between 4.5 and 5.5 for normal operation. At the same time, there is built-in protection circuit of over-current, overheating, overvoltage and under voltage to ensure safety.
  • CUT-160 Inverter Air Plasma CutterEquipped with different gases, CUT-160 inverter air plasma cutter can be used to cut different non-ferrous metals which are impossible missions for oxygen cutting machine. For example, this product can be used as copper cutting machine. Compared with other models, it has a current range from40 to 160A, maximum cutting thickness of 55 mm and best cutting range from 1 to 40 mm.
  • CUT-200 Inverter Air Plasma CutterCUT-200 inverter air plasma cutter is the biggest model of inverter air plasma cutter and its dimension and weight are 17 times and 10.5 times of model PLASMA CUT-40. For application, this product can be mainly used for a variety of metals thinner than 63mm, such as aluminum plate. For cooling methods, water cooling and air cooling are available for customer to choose. As well as that, there are water/air cooling button ...

As a professional enterprise specializing in manufacturing and marketing of cutting machine, our company launches inverter air plasma cutter for domestic and foreign customers. This product, using compressed air as working gas, there is no harm for the operator and cost is very low. At the same time, to cut the metal, high temperature and high-speed air plasma arc is used to rapidly melt the metal of the cutting area and blow the metal away from the body. Compared with ordinary air plasma cutting machine, more advanced power system is adopted in inverter air plasma cutter and voltage can be adjusted, facilitating operation.

There are 8 different models of inverter air plasma cutter, from CUT-40, CUT-60 to CUT-200, and the suffix number stands for the maximum current. Of course, they all have different cutting thicknesses. To be more specific, the smallest model CUT-40 can cut metal thinner than 12mm, whereas the biggest thickness of the metal for CUT-200 is 65mm.

Undoubtedly, there are many features of inverter air plasma cutter. Firstly, designed by PWM technology, this machine is small size, light weight and more energy-efficient. In the second place, with 100% arc success rate, it has the characteristics of concentrated energy, speed and narrow cutting, smooth incision and tiny deformation. Last but not east, this product can be used for arbitrary curve cutting of carbon steel, alloy steel, stainless steel, titanium, copper, aluminum and other nonferrous metal plates.

Jing Gong Welding is an experienced inverter air plasma cutter manufacturer and supplier in China. We provide various types of products such as inverter AC/DC pulse TIG welding machine, welding positioner, and inverter DC TIG welding machine.

Other Products
  • Portable CNC Flame Plasma Cutting MachineThere are a variety of features of portable CNC flame plasma cutting machine. Firstly, because of small occupying area, easy to move and use, low cost, high level of automation, high reliability, easy operation and maintenance, this product can be used individually or in bulk to cut any shape parts. Secondly, special-designed integrated high-strength aluminum alloy material and internal strengthened structure ...
  • CNC Flame Plasma Cutting MachineCNC flame plasma cutting machine, as the latest outstanding model launched by our company, has excellent structure. To be more specific, box beam welding structure design is adopted in cross beam and driving end beam so this machine has compact structure, beautiful appearance, rigid strength, small inertia after processed with stress elimination treatment. As well as that, there are a couple of options of control ...