Inverter DC Arc Welding Machine

Inverter DC Arc Welding Machine

Arc-160 inverter DC arc welding machine can be used as MMA welding machine. It can weld 1.6-3.2 length welding rod. The range of adjustable output current is 20-160A. In order to take convenient for your observation and operation, the output current value can be displayed on the control panel of machine. At present, this machine can be widely used in constructional engineering, house decoration, basis construction and industrial processing and manufacturing.

In addition, the insulation class of this machine is F, means that difference between maximum allowable welding temperature and ambient temperature is about 155 degrees Celsius. While we recommend that the reference temperature difference should be below 120 degrees Celsius.

Parameters of Arc-160 Inverter DC Arc Welding Machine
Input power voltage: AC 220V (single phase) ±10%
Rate input power capacity: 5.3 KVA
Input voltage frequency: 50/60HZ
No-load voltage: 80V
Output current range: 20-160A
Rated output voltage: 27V
Duty cycle: 60%
No-load loss: 40W
Efficiency: 80%
Power factor: 0.85
Insulation class: F
Protection class: IP21S
Diameter of welding rod: 1.6-3.2mm
N.W.: 7.5kg
Dimension(L×W×H): 380×180×330mm

Feedback Form

Other Products
  • Arc-200 Inverter DC Arc Welding MachineArc-200 inverter DC arc welding machine uses voltaic arc as heat source to weld. You should operate the welding rod by hand and adopt shielded metal arc welding to weld by this product. And the diameter of welding rod is 1.6-4mm. Our product is suitable for constructional engineering, house decoration and industrial processing and manufacturing.
  • Arc-250 Inverter DC Arc Welding MachineArc-250 inverter DC arc welding machine adopts inverter technology. In this way, even grid voltage fluctuates and arc length changes, the machine can still get smooth welding current. The weight of this product is twice as Arc-160 type machine. Besides it make use of soft switching technology to reduce no-load loss. Thus it can save energy by 1/3 of traditional welding machine and also save costs of production.